Car battery charger 500A Emergency Power Start Cable Booster Jumper Cable 2x2.2M Car Battery starter Power Wire Emergency Tools
Description:
【Features】
The material of the clip head is copper and has excellent conductivity
[The connection procedure is as follows]
(1) First clamp the red wire of the start line above the red battery anode of the "rescued car".
(2) Then clamp the red wire on the other end over the red battery anode of the "rescue car".
(3) Clamp the black wire on the black negative battery of the "rescued car".
(4) Then clamp the black wire on the black negative battery of the "rescue car".
(5) Start the engine of the "rescue car" before starting the engine of the "rescue car". If it is found that the rescued vehicle still cannot start, please check whether the metal contact part is in bad contact.
After starting the engine, you must still remove the starting ground wire in order, otherwise it may cause a short circuit.
[The procedure for removing the line is as follows]
(1) First remove the black wire from the "rescued car".
(2) Remove the black wire from the "rescue vehicle" again.
(3) Then remove the red wire from the "rescue vehicle".
(4) Finally, remove the red wire from the "rescued car".
NOTE:
It is recommended to use a 500A / 600A ground wire for a displacement below 2.0
Specifications:
Color: Red&Black
Length: 13 Foot
Package Included:
1 x Set of Cables
